The Dani Box 21700 by Dicodes is a high quality regulated device packed with features and powered by the very well regarded Dicodes electronics. Capable of 80W of power (100W in boost mode) and temperature control with various wire types, the firmware allows the user to select one of 4 different modes of operation, allowing the user to switch between variable watt, variable watt with heat protection, variable watt with power boost, or variable temperature. You can turn off the extended features to simplify the menu selections if you wish.
The top and bottom sections of the device are made from a brushed stainless steel and the body is anodised aluminium. Please note: the anodised colour of the body can vary in shade from the photos slightly. We do our best to take accurate photos to represent each batch that arrives.
Navigating the menu interface is surprisingly simple with three buttons and can be operated to change settings easily with one hand. The top mounted larger OLED display screen shows all important information either while you vape, set to only display after your puff, or it can be turned off completely for a stealth mode. The variable temperature feature of this device is extremely accurate and the user can adjust for just about any temperature control capable wire type they so choose. The device can be locked and unlocked with 5 clicks and the up and down buttons can also be locked by holding them both down at once. This is one of the easiest menu systems to use for a device with so many features.
Please note there is no external USB port on this device for charging your battery. You will need to either remove the battery to charge using an external battery charger, or you can dock your device with the Dicodes CS1 Charging Station.
- 80 watts of power (100 watts in boost)
- 0.66 inch OLED display
- Powered by a 1 x 20700 or 21700 battery (Not included)
- Spring-loaded center pin
- Temperature controlled vaping mode with support for various wire-types
- Optimized for dicodes resistance wire RESISTHERM (Sample included)
- Reverse battery protection
- Versatile and easy to use menu structure
- Individual user preferences selection
- 2 years warranty
- Made in Germany
- 1 x Dicodes Dani Box 21700 in the colour of your choice
- User guide
- Sample of Dicodes NiFe wire
- Supplied in a custom metal tin
- Width: 25mm
- Length: 81.8mm
- Depth: 44.7mm
As you'd expect from an advanced device packed with so many features and adjustments, the menu system is quite complex and will take some time getting used to, but after a short amount of time, navigation and setting adjustments will become second nature. We urge you to take some time to read and understand the short manual packaged with the device, and we also recommend you download the comprehensive full manual for more detailed instructions and feature explanation.
Dicodes provide a two year warranty which covers manufacturing faults within the electronic component of the device only. Opening the device, other than the battery cap to change the battery, will void the warranty. The postal fee or shipping charge from the customer to Dicodes is not covered by the warranty in any case.