The Dicodes Dani SBS is a high quality regulated device packed with features and powered by the very well regarded Dicodes electronics. Capable of 80W of power and temperature control with various wire types, the firmware allows the user to select one of 4 different modes of operation, allowing the user to switch between variable watt, variable watt with heat protection, variable watt with power boost, or variable temperature. You can turn off the extended features to simplify the menu selections if you wish.
This 18650 size box mod is even more compact and pocket-friendly than the original Dani Box with the atomiser connection beside the battery compartment. The top and bottom sections of the device are made from a brushed stainless steel and the body is anodised aluminium. Please note: the anodised colour of the body can vary in shade from the photos slightly. We do our best to take accurate photos to represent each batch that arrives.
Navigating the menu interface is surprisingly simple with two buttons and can be operated to change settings easily. The buttons can be configured so you can use either the front-facing button or the back-side top button for firing the device. The top mounted OLED display screen shows all important information either while you vape, set to only display after your puff, or it can be turned off completely for a stealth mode. The variable temperature feature of this device is extremely accurate and the user can adjust for just about any temperature control capable wire type they so choose.
The 510 connection on this device has a removable section that is reverse threaded so you can easily line up your air holes on your tank. This is a 25mm wide connection but please note that some 25mm tanks on the market may not fit due to wider parts such as air flow control or protruding sections on the atomisers. We recommend 24mm tanks max.
Please note there is no external USB port on this device for charging your battery. You will need to either remove the battery to charge using an external battery charger, or you can dock your device with the Dicodes CS1 Charging Station.
- 80 watts of power
- 0.05 – 5 ohm capable
- OLED display
- Powered by a single 18650 (not included)
- Spring-loaded center pin
- Temperature controlled vaping mode with support for various wire-types
- Optimised for dicodes resistance wire RESISTHERM (Sample included)
- Reverse battery protection
- Adjustable 510 connection plate for perfect atomiser alignment
- Versatile and easy to use menu structure
- Individual user preferences selection
- 2 years warranty
- Made in Germany
- 1 x Dicodes Dani SBS in the colour of your choice
- User guide
- Sample of Dicodes NiFe wire
- Supplied in a custom metal tin
- Width: 46.5mm
- Length: 77mm
- Depth: 25mm
- Weight: 146g
As you'd expect from an advanced device packed with so many features and adjustments, the menu system is quite complex and will take some time getting used to, but after a short amount of time, navigation and setting adjustments will become second nature. We urge you to take some time to read and understand the short manual packaged with the device, and we also recommend you download the comprehensive full manual for more detailed instructions and feature explanation.
Dicodes provide a two year warranty which covers manufacturing faults within the electronic component of the device only. Opening the device, other than the battery cap to change the battery, will void the warranty. The postal fee or shipping charge from the customer to Dicodes is not covered by the warranty in any case.